<aside> ☝ If you have received the CPR station with the initial setup already completed, you can skip this section and proceed to section 2.2.
</aside>
➀ Turn on the power for the manikin or cprCUBE Pro. Depending on the model, connect the power or supply batteries.
➁ Download the CPR aok Instructor app from the App Store or Google Play Store.
➂ Launch the app and press 'Connect Kit' to connect the manikin. Follow the initial setup guide that pops up when connecting.
➃ Assign a color ID to the manikin. The color ID is a combination of color and number used to distinguish the manikin and will be displayed when searching for the manikin. Attach a sticker corresponding to the assigned color ID to a visible location on the manikin.
➀ Install the station main body and stand according to the product guide and connect them to power.
➁ Run the provided CPR station software installation file (apk or exe file) on the station main body.
➂ Once the installation is complete, run the CPR station app.
➃ Enter your purchased license on the screen.
➄ Follow the instructions displayed on the screen to complete the initial setup.
Before using the product, make sure to check the following.
Turn on the manikin's power in advance. For wired models, it will turn on when connected to power. (When waking up the manikin, applying deep pressure for 2-3 seconds will trigger a beep sound.)
Make sure the kiosk's power is turned on. If it's off, press the power button to turn it on. Check if the CPR station software runs when the device is turned on.
Swipe down from the top of the kiosk screen to access settings. Select 'Scheduled on/off' from the settings menu, then set 'Automatic Power' to 'On/Off' and specify the 'Reservation Time'.
The manikin from the pre-set list will be automatically connected. If it's not automatically connected, refer to section 4.4. Manikin Connection Management
Swipe up from the bottom to the top of the kiosk screen and press the speaker button. Adjust the volume using the volume adjustment slider.